锡石多金属硫化矿微波助磨试验研究

本文以广西某选矿厂锡石多金属硫化矿矿石为原料,研究了微波预处理对矿石磨矿产物粒度组成、磨矿动力学、破碎速率及磨机生产能力的影响。结果表明,微波预处理后,矿石在不同磨矿时间下的磨矿产物粒度均变细,-0.074mm粒级含量提高了4.41%~12.90%；微波预处理前后该矿石磨矿均符合一级磨矿动力学模型；微波预处理使矿石的破碎速率(S₁)值提高近57%,且磨机的生产能力得到了明显提升。因此,微波预处理可以降低矿石的强度,强化矿石的磨矿过程,是一种有效的降低磨矿能耗、提高磨矿效率的方法。     

Removal of Cu2+ from Water Using Liquid-Liquid Microchannel Extraction

The very good extraction selectivity of Cu²⁺ from water was demonstrated with a new microchannel equipment, by employing di-(2-ethylhexyl)phosphoric acid (D2EHPA) as an extractant and kerosene as a solvent. The effects of different experimental parameters on the extraction efficiency E, the volumetric mass transfer coefficient K_La, and the entrainment were experimentally investigated. The results showed that the extraction efficiency increased with increasing temperature, extractant concentration, phase ratio (organic/aqueous), and pH. The total flow rate, phase ratio, and pH were found to have a great effect on the mass transfer, whereas the temperature and the extractant concentration showed little effect.     

Fault detection and diagnosis with parametric uncertainty using generalized polynomial chaos

This paper presents a new methodology to identify and diagnose intermittent stochastic faults occurring in a process. A generalized polynomial chaos (gPC) expansion representing the stochastic inputs is employed in combination with the nonlinear mechanistic model of the process to calculate the resulting statistical distribution of measured variables that are used for fault detection and classification. A Galerkin projection based stochastic finite difference analysis is utilized to transform the stochastic mechanistic equation into a coupled deterministic system of equations which is solved numerically to obtain the gPC expansion coefficients. To detect and recognize faults, the probability density functions (PDFs) and joint confidence regions (JCRs) of the measured variables to be used for fault detection are obtained by substituting samples from a random space into the gPC expansions. The method is applied to a two dimensional heat transfer problem with faults consisting of stochastic changes combined with step change variations in the thermal diffusivity and in a boundary condition. The proposed methodology is compared with a Monte Carlo (MC) simulations based approach to illustrate its advantages in terms of computational efficiency as well as accuracy.     

Modeling Smart Grid neighborhoods with the ENERsip ontology

The electricity consumption in the buildings sector has been steadily increasing during the last decade, up to the point that energy efficiency in this sector has become a major problem for governments, utilities, customers, and the environment. The foreseen high penetration of distributed micro-generation facilities based on renewables can help to reduce the environmental footprint of buildings and households, although the complexity of managing effectively the electric grid increases dramatically under these conditions. The IEEE 2030 standard for interoperability in the Smart Grid remarks upon the importance of well-defined data models in such complex scenarios and puts emphasis on the benefits of ontologies and OWL (Web Ontology Language) for this purpose. This paper presents an OWL-based ontology that formally defines the vocabulary and taxonomy and captures the engineering and business semantics of this domain of knowledge (i.e., energy efficiency in the so-called nZEN – nearly Zero-Energy Neighborhoods). This ontology has been defined under the scope of the EU (European Union) research project ENERsip. The paper also highlights the main benefits the ontology brought to all the phases of the project life cycle, as well as how future work can make the most out of it.     

Gasification biochar as a valuable by-product for carbon sequestration and soil amendment

Thermal gasification of various biomass residues is a promising technology for combining bioenergy production with soil fertility management through the application of the resulting biochar as soil amendment. In this study, we investigated gasification biochar (GB) materials originating from two major global biomass fuels: straw gasification biochar (SGB) and wood gasification biochar (WGB), produced by a Low Temperature Circulating Fluidized Bed gasifier (LT-CFB) and a TwoStage gasifier, respectively, optimized for energy conversion. Stability of carbon in GB against microbial degradation was assessed in a short-term soil incubation study and compared to the traditional practice of direct incorporation of cereal straw. The GBs were chemically and physically characterized to evaluate their potential to improve soil quality parameters. After 110 days of incubation, about 3% of the added GB carbon was respired as CO₂, compared to 80% of the straw carbon added. The stability of GB was also confirmed by low H/C and O/C atomic ratios with lowest values for WGB (H/C 0.12 and O/C 0.10). The soil application of GBs exhibited a liming effect increasing the soil pH from ca 8 to 9. Results from scanning electron microscopy and BET analyses showed high porosity and specific surface area of both GBs, indicating a high potential to increase important soil quality parameters such as soil structure, nutrient and water retention, especially for WGB. These results seem promising regarding the possibility to combine an efficient bioenergy production with various soil aspects such as carbon sequestration and soil quality improvements.     

Calculating the degree of degradation of the volatile solids in continuously operated bioreactors

Determining the degree of degradation is an important means of assessing the efficiency of biological processes. However, one should consider the fact that during degradation, the reference value, such as volume or the mass of total solids, is also subject to change. The assumption that the incoming and outgoing mass flows are identical is only possible for substrates with a high water content and hence, a low energy density. For substrates with a higher energy density, a correction by the gaseous mass flow is required, but usually its quantification is difficult, especially when examining full-scale plants or open systems. Based on the assumption that the mass of inorganic solids is constant during the process, a universally applicable equation has been developed, requiring only the input and output volatile solids concentrations for calculation.     

Development of insertion-type peristalsis pump using pneumatic artificial muscles

This study aims to develop a new type of peristaltic pump that transports high-viscosity and solid–liquid mixture fluids. Pumps capable of transporting such fluids are essential in various situations such as factory transportation, outdoors, and emergencies. These fluids are conventionally transported by positive-displacement and rotodynamic pumps. However, solid–liquid fluids could collide with the impeller of the rotodynamic pump and thereby damage the pump, whereas the positive-displacement pump must be sufficiently large to apply high pressure to the transported fluid. A small pump that can transport these fluids would save factory space and enable outdoor applications such as dredging operations. Thus, we adopted earthworm peristalsis as a model mechanism of fluid transport within a standard plumbing infrastructure. The insertion-type peristaltic pump developed in this study uses an artificial rubber muscle to achieve an earthworm-like mechanism. The capability and energy efficiency of the mechanism is evaluated in water transportation experiments.     

High efficient OLEDs based on novel Re(I) complexes with phenanthroimidazole derivatives

Novel rhenium(I) [Re(I)] complexes with phenanthroimidazole ligands were successfully designed, synthesized and characterized. The Re(I) complexes displayed intense phosphorescence with yellow or orange color around 540–580 nm at room temperature with relatively short lifetimes. The phosphorescent simple-structure OLEDs using these Re(I) complexes as dopants exhibited low turn-on voltage of 3.5–3.6 V, maximum current efficiencies of 18.7–21.1 cd A⁻¹ and maximum power efficiencies of 13.3–18.9 lm W⁻¹, which were amongst the highest reported for OLEDs based on Re(I) complexes with phenanthroline ligands as emitters. The excellent performances are due to the bulky steric Re(I) complexes with short lifetime and good electron-transporting ability, which may improve the electron injection and result in greater balance between electron and hole fluxes. The results suggest that these complexes have potential application in OLEDs.     

Optimal scheduling of single stage batch plants with direct heat integration

This paper addresses the multi-objective optimization problem arising in the operation of heat integrated batch plants, where makespan and utility consumption are the two conflicting objectives. A new continuous-time MILP formulation with general precedence variables is proposed to simultaneously handle decisions related to timing, product sequencing, heat exchanger matches (selected from a two-stage superstructure) and their heat loads. It features a complex set of timing constraints to synchronize heating and cooling tasks, derived from Generalized Disjunctive Programming. Through the solution of an industrial case study from a vegetable oil refinery, we show that major savings in utilities can be achieved while generating the set of Pareto optimal solutions through the ɛ-constraint method.     

The analysis and comparison of two novel kinds of focusing elements as reflectors

In this article, two novel kinds of focusing elements as reflectors are analyzed and compared. One is the grooved Fresnel zone plate reflector with continuous phase‐correcting. The other called subzone paraboloid reflector, has the profile that consists of a series of paraboloids. Their diffraction efficiencies and bandwidths are described. The two elements still preserve the advantages of Fresnel zone plates, namely, low profile, high efficiency, and simple fabrication. Two dual‐reflector antennas using the proposed focusing elements as the main reflectors are simulated and the results show that these antennas have good radiation performances. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:101–108, 2015.